Double Glazed Window Repair
It's worth checking the warranty that comes with the majority of double-glazed windows. It generally covers any problems with the window hardware - hinges and locking mechanisms - within the first 10 years.
Mist in between glass windows can be caused by a breach in the seal and must be fixed quickly to prevent damp or mould developing in your property.
Condensation Between the Windows
If you notice condensation appearing between your windows, it is an indication that the seal in the gas insulating the windows has failed. This could be a major issue that needs to be dealt with as soon as possible, especially in winter when humidity is at its highest. It can also cause damage around the sills and sealant, or even mildew or mould.
Double-glazed windows should not have condensation between the panes. This is often caused by high humidity or a very cold snap. Fortunately, this issue is repaired without replacing the entire window. www.repairmywindowsanddoors.co.uk can drill small holes in the glass and then spray the inside of the window with a specific cleaning solution. The water is then removed from the window. Additionally, an anti-fogger can be installed to prevent the accumulation of moisture from happening again.
Condensation in the windows could also occur due to air leakage or other causes outside the window. In this instance, it may take longer for the moisture inside the window to build up as the air must be warm enough to evaporate the water molecules. In these cases it might be more beneficial to replace the double glazed windows instead of trying to repair the seals on the existing units.
Double-glazed glass windows are composed of two or more pieces of insulated tempered glass, which are joined by a framework made of metal. The gap between the two of the windows is filled with a non-toxic gas for insulation like argon or krypton, and then sealed tightly. The seal stops the insulating gases from leaving and also prevents air and moisture from entering the gap.
As the windows age, the seals will weaken and allow moisture to leak into the gap between the glass panes. When the seals leak it is essential to be aware of this since it indicates that the double glazing is no longer performing as efficiently as it did before. This could lead to poor energy efficiency, higher heating bills, damaged properties and the risk of condensation between the windows.
Mist
It is normal to see condensation appear on your windows. This means that your double glazing system is functioning well and is able to keep heat in your house. The condensation develops because the outside air is warmer than the glass and it reaches its dew point before the window does. This is among the many benefits of having good quality double glazing.
If you see condensation on the inside of the window, this could indicate a ventilation issue within your home. The moisture that is accumulating can't go anywhere else and ends in the window, carpets, furniture, and other areas of your home. Getting this checked out by an expert and making sure that there plenty of fresh air flowing through your home will help prevent it from happening again.
Another reason why you may get mist on your double-glazed window is that the seal between the two panes has worn down. This could be due wear and tear or chemical cleaning products that are being employed. If this occurs the best solution is to repair the windows in the shortest time possible.
A professional repair of your windows will ensure they remain fog-free, free of condensation and free of misting. This is also much cheaper than replacing your windows and you will save money on your energy bill.
A FENSA-registered window installer can provide you with a price to repair or replace your double-glazed windows. Upgrade your old windows to energy efficient ones that are A-rated in the event that they are extremely old.
It is a good idea to retain copies of any warranties and agreements with your window installers. It will be useful if you experience any problems with your windows. You can contact your window fitters and work out the problem. This is better than ignoring the issue which could cause additional problems in your home.
Close or open without difficulty
It's not just a nuisance when double-glazed windows are hard to open or close. They can also result in more energy costs due to heat loss and draughts. It can also be a security issue, particularly when the locks aren't operating correctly. It is crucial to address any problems with double glazed windows and doors immediately you notice them.
If you're unable to open your windows and have tried the simplest of fixes like using a screwdriver to pry it open or tapping around the frame using a sharp object, the issue might be more serious. It could be that the window is sagging within its frame and requires to be set again or it could be that there is gaps between the glass panes and frames. In either case, consult a double-glazing repair expert to ensure that the repairs are done properly and to avoid any further issues.
It's not unusual for UPVC window handle and lock mechanisms to become difficult to operate or stuck particularly when they're old and worn. This is caused by an accumulation of grease or dirt inside the handle. This can be solved by cleaning it with a uPVC cleaner. If this does not work, you could try tapping the uPVC using the help of a screwdriver. Be careful not to damage either the handle or window handle mechanism.
If this doesn't resolve the problem, the window will need to be replaced since the hinges may not be in the correct position or the locking mechanism might be damaged. In this situation, seek out a professional UPVC window repair expert.
David The Window Wizard is a specialist in double-glazed window and door repairs, which includes repairing a double-glazed window that has jammed or been locked shut. He has lots of experience converting old window mechanisms into modern ones. This could save you money in the replacement of the entire window. For more information or to schedule a free quote call or email us today.
Warping
Double-glazed windows are usually the best option for saving energy in your home. They are made up of two distinct panes with a spacer, gas or air between the panes, which creates an airtight seal to keep cold air out and warm air inside. However with time, these windows can be damaged or broken and require repair. Most repairs can be made without replacing the entire window.
Warping is a frequent issue when double-glazed windows are installed. This occurs when the windows begin to bend, bow or twist, which may impact the strength of the window as well as its ability to insulate. Double glazed windows should be properly installed and maintained to avoid this issue.
If your double-glazed windows are starting to swell, it's crucial to get in touch with a specialist immediately to help prevent the situation from worsening. They can inspect your windows to pinpoint the reason. They will make use of specific tools to correct the issue and ensure that your windows are completely sealed.
Water vapour can trigger this issue, since it can accumulate between the windows over time. This can be caused various factors, such as the weather, humidity and temperature fluctuations. To fix this, the specialist will drill a small hole in the window to release the moisture. They will then apply an agent for cleaning to wash the glass and apply an adhesive to keep it dry in the future.
If your windows cannot be opened or shut it could be due to a broken mechanism or hinges. Before calling a professional to fix the issue, it's worthwhile to grease the parts. This will usually resolve the issue and decrease the need for replacements. If your windows are dated or don't provide the insulation you require it might be better to replace them.